⚠️ Cofense Triage Threat Indicators Ingestion

⚠️ Unpublished: This item is from a solution that is not yet published on Azure Marketplace or not installed in Content Hub.

Browse: 🏠 · Solutions · Connectors · Methods · Tables · Content · Parsers · ASIM Parsers · ASIM Products · Logic Apps · 📊

↑ Back to Connectors Index

Attribute Value
Connector ID CofenseTriage
Publisher Cofense
Used in Solutions CofenseTriage
Collection Method Azure Function (TI Upload API)
Connector Definition Files CofenseTriage_API_FunctionApp.json
Ingestion API Sentinel REST createIndicator API — Connector code references Sentinel REST createIndicator API endpoint (matched '/main/createindicator')
Custom Log V1 Tables Yes 🔶 — ingests into tables with type-suffixed columns

The Cofense-Triage data connector provides the following capabilities:

  1. CofenseBasedIndicatorCreator :
  1. NonCofenseBasedIndicatorCreatorToCofense :
  1. IndicatorCreatorToDefender :
  1. RetryFailedIndicators :

For more details of REST APIs refer to the below two documentations:

  1. Cofense API documentation:

https://<your-cofense-instance-name>/docs/api/v2/index.html

  1. Microsoft Threat Intelligence Indicator documentation:

https://learn.microsoft.com/rest/api/securityinsights/preview/threat-intelligence-indicator

  1. Microsoft Defender for Endpoints Indicator documentation:

https://learn.microsoft.com/microsoft-365/security/defender-endpoint/ti-indicator?view=o365-worldwide

Tables Ingested

This connector ingests data into the following tables:

Table Selection Criteria Transformations Ingestion API Lake-Only
Cofense_Triage_failed_indicators_CL 🔶 ? ✓ ?
Report_links_data_CL 🔶 ? ✓ ?
ThreatIntelligenceIndicator SourceSystem !startswith "Cofense :"
SourceSystem startswith "Cofense :"		 ✓ ✓ ✗

💡 Tip: Tables with Ingestion API support allow data ingestion via the Azure Monitor Data Collector API, which also enables custom transformations during ingestion.

Permissions

Resource Provider Permissions:

Custom Permissions:

Setup Instructions

⚠️ Note: These instructions were automatically generated from the connector's user interface definition file using AI and may not be fully accurate. Please verify all configuration steps in the Microsoft Sentinel portal.

NOTE: This connector uses Azure Functions to connect to the Cofense APIs to pull its Threat Indicators and create Threat Intelligence Indicators into Microsoft Sentinel Threat Intelligence and pulls Non-Cofense Threat Intelligence Indicators from Microsoft Sentinel and create/update Threat Indicators in Cofense. Likewise, it also creates/updates Cofense Based Threat Indicators in Microsoft Defender for Endpoints. All this might result in additional indicator and data ingestion costs. Check the Azure Functions pricing page for details.

(Optional Step) Securely store workspace and API authorization key(s) or token(s) in Azure Key Vault. Azure Key Vault provides a secure mechanism to store and retrieve key values. Follow these instructions to use Azure Key Vault with an Azure Function App.

STEP 1 - App Registration steps for the Microsoft Azure Active Directory Application

This integration requires an App registration in the Azure portal. Follow the steps in this section to create a new Azure Active Directory application:

  1. Sign in to the Azure portal.
  2. Search for and select Azure Active Directory.
  3. Under Manage, select App registrations > New registration.
  4. Enter a display Name for your application.
  5. Select Register to complete the initial app registration.
  6. When registration finishes, the Azure portal displays the app registration's Overview pane. You see the Application (client) ID and Tenant ID. The client ID and Tenant ID is required as configuration parameters for the execution of CofenseTriage Data Connector.

Reference link: https://learn.microsoft.com/azure/active-directory/develop/quickstart-register-app

STEP 2 - Add a client secret for Microsoft Azure Active Directory Application

Sometimes called an application password, a client secret is a string value required for the execution of CofenseTriage Data Connector. Follow the steps in this section to create a new Client Secret:

  1. In the Azure portal, in App registrations, select your application.
  2. Select Certificates & secrets > Client secrets > New client secret.
  3. Add a description for your client secret.
  4. Select an expiration for the secret or specify a custom lifetime. Limit is 24 months.
  5. Select Add.
  6. Record the secret's value for use in your client application code. This secret value is never displayed again after you leave this page. The secret value is required as configuration parameter for the execution of CofenseTriage Data Connector.

Reference link: https://learn.microsoft.com/azure/active-directory/develop/quickstart-register-app#add-a-client-secret

STEP 3 - Assign role of Contributor to Microsoft Azure Active Directory Application

Follow the steps in this section to assign the role:

  1. In the Azure portal, Go to Resource Group and select your resource group.
  2. Go to Access control (IAM) from left panel.
  3. Click on Add, and then select Add role assignment.
  4. Select Contributor as role and click on next.
  5. In Assign access to, select User, group, or service principal.
  6. Click on add members and type your app name that you have created and select it.
  7. Now click on Review + assign and then again click on Review + assign.

Reference link: https://learn.microsoft.com/azure/role-based-access-control/role-assignments-portal

STEP 4 - Assign Defender Threat Indicator permissions to Microsoft Azure Active Directory Application

Follow the steps in this section to assign the permissions:

  1. In the Azure portal, in App registrations, select your application.
  2. To enable an app to access Defender for Endpoint indicators, assign it 'Ti.ReadWrite.All' permission, on your application page, select API Permissions > Add permission > APIs my organization uses >, type WindowsDefenderATP, and then select WindowsDefenderATP.
  3. Select Application permissions > Ti.ReadWrite.All, and then select Add permissions.
  4. Select Grant consent.

Reference link: https://docs.microsoft.com/microsoft-365/security/defender-endpoint/exposed-apis-create-app-webapp?view=o365-worldwide

STEP 5 - Steps to create/get Credentials for the Cofense Triage account

Follow the steps in this section to create/get Cofense Client ID and Client Secret:

  1. Go to Administration > API Management > Version 2 tab > Applications
  2. Click on New Application
  3. Add the required information and click on submit.

STEP 6 - Choose ONE from the following two deployment options to deploy the connector and the associated Azure Function

IMPORTANT: Before deploying the Cofense Triage Threat Indicators data connector, have the Workspace ID and Workspace Primary Key (can be copied from the following) readily available.., as well as the Cofense API Authorization Key(s).

7. Option 1 - Azure Resource Manager (ARM) Template

Use this method for automated deployment of the Cofense connector.

  1. Click the Deploy to Azure button below.

    Deploy To Azure

  2. Select the preferred Subscription, Resource Group and Location.

  3. Enter the below information : Function Name Workspace ID Workspace Key Cofense URL (https:///)
    Cofense Client ID Cofense Client Secret Azure Client ID Azure Client Secret Azure Tenant ID Azure Resource Group Name Azure Workspace Name Azure Subscription ID Threat Level Proxy Username (optional) Proxy Password (optional) Proxy URL (optional) Proxy Port (optional) Throttle Limit for Non-Cofense Indicators (optional) LogLevel (optional) Reports Table Name Schedule

  4. Mark the checkbox labeled I agree to the terms and conditions stated above.

  5. Click Purchase to deploy.

8. Option 2 - Manual Deployment of Azure Functions

Use the following step-by-step instructions to deploy the Cofense Triage Threat Indicators data connector manually with Azure Functions (Deployment via Visual Studio Code).

1. Deploy a Function App

NOTE: You will need to prepare VS code for Azure function development.

  1. Download the Azure Function App file. Extract archive to your local development computer.

  2. Start VS Code. Choose File in the main menu and select Open Folder.

  3. Select the top level folder from extracted files.

  4. Choose the Azure icon in the Activity bar, then in the Azure: Functions area, choose the Deploy to function app button. If you aren't already signed in, choose the Azure icon in the Activity bar, then in the Azure: Functions area, choose Sign in to Azure If you're already signed in, go to the next step.

  5. Provide the following information at the prompts:

    a. Select folder: Choose a folder from your workspace or browse to one that contains your function app.

    b. Select Subscription: Choose the subscription to use.

    c. Select Create new Function App in Azure (Don't choose the Advanced option)

    d. Enter a globally unique name for the function app: Type a name that is valid in a URL path. The name you type is validated to make sure that it's unique in Azure Functions. (e.g. CofenseXXXXX).

    e. Select a runtime: Choose Python 3.11 or above.

    f. Select a location for new resources. For better performance and lower costs choose the same region where Microsoft Sentinel is located.

  6. Deployment will begin. A notification is displayed after your function app is created and the deployment package is applied.

  7. Go to Azure Portal for the Function App configuration.

2. Configure the Function App

  1. In the Function App, select the Function App Name and select Configuration.
  2. In the Application settings tab, select + New application setting.
  3. Add each of the following application settings individually, with their respective values (case-sensitive): Workspace ID Workspace Key Cofense URL (https:///)
    Cofense Client ID Cofense Client Secret Azure Client ID Azure Client Secret Azure Tenant ID Azure Resource Group Name Azure Workspace Name Azure Subscription ID Threat Level Proxy Username (optional) Proxy Password (optional) Proxy URL (optional) Proxy Port (optional) Throttle Limit for Non-Cofense Indicators (optional) LogLevel (optional) Reports Table Name Schedule logAnalyticsUri (optional)
  1. Once all application settings have been entered, click Save.

Additional Documentation

📄 Source: [CofenseTriage\Data Connectors\CofenseTriageDataConnector\README.md](https://github.com/Azure/Azure-Sentinel/blob/master/Solutions/CofenseTriage\Data Connectors\CofenseTriageDataConnector\README.md)

Cofense Triage Data Connector

Introduction

The Cofense-Triage data connector provides the following capabilities:

  1. CofenseBasedIndicatorCreator: Get Threat Indicators from the Cofense Triage platform and create Threat Intelligence Indicators in Microsoft Sentinel. Ingest Cofense Indicator ID and report links into custom logs table.
  2. NonCofenseBasedIndicatorCreatorToCofense: Get Non-Cofense Threat Intelligence Indicators from Microsoft Sentinel Threat Intelligence and create/update Indicators in Cofense Triage platform
  3. IndicatorCreatorToDefender: Get Cofense Triage Threat Intelligence Indicators from Microsoft Sentinel Threat Intelligence and create/update Indicators in Microsoft Defender for Endpoints.

For more details of REST APIs refer to the below two documentations:

  1. Cofense API documentation: https://<your-cofense-instance-name>/docs/api/v2/index.html
  2. Microsoft Threat Intelligence Indicator documentation: https://learn.microsoft.com/rest/api/securityinsights/preview/threat-intelligence-indicator
  3. Microsoft Defender for Endpoints Indicator documentation: https://learn.microsoft.com/microsoft-365/security/defender-endpoint/ti-indicator?view=o365-worldwide

Prerequisites

To integrate with Cofense Triage make sure you have:

  1. Azure Subscription: Azure Subscription with owner role is required to register an application in azure active directory(AAD) and assign role of contributor to AAD application in resource group.
  2. Workspace: read and write permissions on the workspace are required.
  3. Keys: read permissions to shared keys for the workspace are required.See the documentation to learn more about workspace keys.
  4. Microsoft.Web/sites permissions: Read and write permissions to Azure Functions to create a Function App is required.See the documentation to learn more about Azure Functions.
  5. REST API Credentials/permissions: Cofense Client ID and Client Secret is required. See the documentation to learn more about API on the https://<your-cofense-instance-name>/docs/api/v2/index.html.
  6. Microsoft Defender for Endpoints: Microsoft Defender for Endpoints License is required for IndicatorCreatorToDefender function.

Folders

  1. CofenseDataConnector/ - This contains the package, requirements, ARM JSON file, connector page template JSON, and other dependencies.

  2. CofenseBasedIndicatorCreator/ - This contains the Azure function source code to ingest Cofense Triage Threat Indicators into Microsoft Sentinel Threat Intelligence indicators .

  3. NonCofenseBasedIndicatorCreatorToCofense - This contains the Azure function source code to ingest Microsoft Sentinel Threat Intelligence indicators into Cofense Triage Threat Indicators.

  4. IndicatorCreatorToDefender - This contains the Azure function source code to ingest Cofense Threat Indicators from Microsoft Sentinel Threat Intelligence into Microsoft Defender for Endpoints.

  5. SharedCode - This contains the common source code for the execution of both CofenseBasedIndicatorCreator and NonCofenseBasedIndicatorCreatorToCofense Azure functions.

Configuration

NOTE: This connector uses Azure Functions to connect to the Cofense APIs to pull its Threat Indicators and create Threat Intelligence Indicators into Microsoft Sentinel Threat Intelligence and pulls Non-Cofense Threat Intelligence Indicators from Microsoft Sentinel and create/update Threat Indicators in Cofense. Likewise, it also creates/updates Cofense Based Threat Indicators in Microsoft Defender for Endpoints. All this might result in additional indicator and data ingestion costs. Check the Azure Functions pricing page for details.

(Optional Step) Securely store workspace and API authorization key(s) or token(s) in Azure Key Vault. Azure Key Vault provides a secure mechanism to store and retrieve key values. Follow these instructions to use Azure Key Vault with an Azure Function App.

STEP 1 - Registration steps for the Microsoft Azure Active Directory Application

This integration requires an App registration in the Azure portal. Follow the steps in this section to create a new Azure Active Directory application:

  1. Sign in to the Azure portal.
  2. Search for and select Azure Active Directory.
  3. Under Manage, select App registrations > New registration.
  4. Enter a display Name for your application.
  5. Select Register to complete the initial app registration.
  6. When registration finishes, the Azure portal displays the app registration's Overview pane. You see the Application (client) ID and Tenant ID. The client ID and Tenant ID is required as configuration parameters for the execution of CofenseTriage Data Connector.

Reference link: https://learn.microsoft.com/azure/active-directory/develop/quickstart-register-app

STEP 2 - Add a client secret for Microsoft Azure Active Directory Application

Sometimes called an application password, a client secret is a string value required for the execution of CofenseTriage Data Connector. Follow the steps in this section to create a new Client Secret:

  1. In the Azure portal, in App registrations, select your application.
  2. Select Certificates & secrets > Client secrets > New client secret.
  3. Add a description for your client secret.
  4. Select an expiration for the secret or specify a custom lifetime. Limit is 24 months.
  5. Select Add.
  6. Record the secret's value for use in your client application code. This secret value is never displayed again after you leave this page. The secret value is required as configuration parameter for the execution of CofenseTriage Data Connector.

Reference link: https://learn.microsoft.com/azure/active-directory/develop/quickstart-register-app#add-a-client-secret"

STEP 3 - Assign role of Contributor to Microsoft Azure Active Directory Application

Follow the steps in this section to assign the role:

  1. In the Azure portal, Go to Resource Group and select your resource group.
  2. Go to Access control (IAM) from left panel.
  3. Click on Add, and then select Add role assignment.
  4. Select Contributor as role and click on next.
  5. In Assign access to, select User, group, or service principal.
  6. Click on add members and type your app name that you have created and select it.
  7. Now click on Review + assign and then again click on Review + assign.

Reference link: https://learn.microsoft.com/azure/role-based-access-control/role-assignments-portal

STEP 4 - Assign Defender Threat Indicator permissions to Microsoft Azure Active Directory Application

Follow the steps in this section to assign the permissions:

  1. In the Azure portal, in App registrations, select your application.
  2. To enable an app to access Defender for Endpoint indicators, assign it 'Ti.ReadWrite.All' permission, on your application page, select API Permissions > Add permission > APIs my organization uses >, type WindowsDefenderATP, and then select WindowsDefenderATP.
  3. Select Application permissions > Ti.ReadWrite.All, and then select Add permissions.
  4. Select Grant consent.

Reference link: https://docs.microsoft.com/microsoft-365/security/defender-endpoint/exposed-apis-create-app-webapp?view=o365-worldwide

STEP 5 - Configuration steps for the Cofense Client ID and Client Secret

Follow the steps in this section to create/get Cofense Client ID and Client Secret:

  1. Go to Administration > API Management > Version 2 tab > Applications
  2. Click on New Application
  3. Add the required information and click on submit."

Deployment

Choose ONE from the following two deployment options to deploy the connector and the associated Azure Function:

IMPORTANT: Before deploying the Cofense Threat Indicators data connector, have the Workspace ID and Workspace Primary Key.

Option 1 - Azure Resource Manager (ARM) Template

Use this method for automated deployment of the Cofense connector.

  1. Go to Microsoft Sentinel -> Data Connectors.
  2. Click on the Cofense Triage Data Connector, connector page will open.
  3. Click the Deploy to Azure button.
  4. Select the preferred Subscription, Resource Group and Location.
  5. Enter the below information :
     Function Name
 Workspace ID
 Workspace Key
 Cofense URL (https://<your-cofense-instance-name>/)
 Cofense Client ID
 Cofense Client Secret
 Azure Client ID
 Azure Client Secret
 Azure Tenant ID
 Azure Resource Group Name
 Azure Workspace Name
 Azure Subscription ID
 Threat Level
 Proxy Username (optional)
 Proxy Password (optional)
 Proxy URL (optional)
 Proxy Port (optional)
 Throttle Limit for Non-Cofense Indicators (optional)
 LogLevel (optional)
 Reports Table Name
 Schedule
  6. Mark the checkbox labeled I agree to the terms and conditions stated above.
  7. Click Purchase to deploy.

Option 2 - Manual Deployment of Azure Functions

Use the following step-by-step instructions to deploy the Cofense Threat Indicators data connector manually with Azure Functions (Deployment via Visual Studio Code).

1. Deploy a Function App

NOTE: You will need to prepare VS code for Azure function development.

  1. Download the Azure Function App App file. Extract archive to your local development computer.
  2. Start VS Code. Choose File in the main menu and select Open Folder.
  3. Select the top level folder from extracted files.
  4. Choose the Azure icon in the Activity bar, then in the Azure: Functions area, choose the Deploy to function app button. If you aren't already signed in, choose the Azure icon in the Activity bar, then in the Azure: Functions area, choose Sign in to Azure If you're already signed in, go to the next step.
  5. Provide the following information at the prompts:
    1. Select folder: Choose a folder from your workspace or browse to one that contains your function app.
    2. Select Subscription: Choose the subscription to use.
    3. Select Create new Function App in Azure (Don't choose the Advanced option)
    4. Enter a globally unique name for the function app: Type a name that is valid in a URL path. The name you type is validated to make sure that it's unique in Azure Functions. (e.g. CofenseXXXXX).
    5. Select a runtime: Choose Python 3.11
    6. Select a location for new resources. For better performance and lower costs choose the same region where Microsoft Sentinel is located.
  6. Deployment will begin. A notification is displayed after your function app is created and the deployment package is applied.
  7. Go to Azure Portal for the Function App configuration.

2. Configure the Function App

  1. In the Function App, select the Function App Name and select Configuration.
  2. In the Application settings tab, select + New application setting.
  3. Add each of the following application settings individually, with their respective values (case-sensitive):
     Workspace ID
 Workspace Key
 Cofense URL (https://<your-cofense-instance-name>/)
 Cofense Client ID
 Cofense Client Secret
 Azure Client ID
 Azure Client Secret
 Azure Tenant ID
 Azure Resource Group Name
 Azure Workspace Name
 Azure Subscription ID
 Threat Level
 Proxy Username (optional)
 Proxy Password (optional)
 Proxy URL (optional)
 Proxy Port (optional)
 Throttle Limit for Non-Cofense Indicators (optional)
 LogLevel (optional)
 Reports Table Name
 Schedule
 logAnalyticsUri (optional)
    • Use logAnalyticsUri to override the log analytics API endpoint for dedicated cloud. For example, for public cloud, leave the value empty; for Azure GovUS cloud environment, specify the value in the following format: https://<CustomerId>.ods.opinsights.azure.us.
  4. Once all application settings have been entered, click Save.

Browse: 🏠 · Solutions · Connectors · Methods · Tables · Content · Parsers · ASIM Parsers · ASIM Products · Logic Apps · 📊

↑ Back to Connectors Index